SpearMaster STORM spear

Varillas from the prestigious South African manufacturer SPEARMASTER.

Famous for using an exceptional steel that gives them their impressive hardness and toughness. Manufacturers of rods in stainless steel cannot go from some HRC (Rockwell) hardness because the stainless materials from these hardnesss become brittle and brittle and often break through the drills or recesses of the rods.

SpearMaster rods are twice harder than stainless steel rods and this makes there no bending when the rods are fired even with strong or multi-gumed rubbers, getting more precise shots than those obtained with stainless steel rods (especially if the load of the rubbers is high

SpearMaster has been making pump-proof rods with high-quality temperable steels for many years with an external galvanizing treatment that allows the rod to not rust, passing the saltwater dew exposure test at 32 degrees C for 500 hours.  It should be noted that in areas with deep chafing such as the tip, rust will come out due to the loss of external treatment or when they spend long periods of time (months) without sweetening the rod.

Tested with high-powered rifles in extreme fishing: multigomas, roller, inverter and DUPLEX roller-inverter

shot with stone shots with double-rubber rifles to the hole,

They are equipped with 2 freight nipples, reinforced letve down (except express notice)

Under orders minimum of 20 rods, they can be customized to taste: Nipples in quantity and shapes, Threads of M7 and M6, aletlets, lengths......